ReliableSafeCompact
With laser rangefinder,you wl get great help when you go hiking,play golf, go hunting orgo hiking in the forest orelectrca powerin countryside.
Laser rangefinder use 6X monoculareyepiece with multicoating to nsure the clear field of view.It only needs 0.3s to get the value of distance This can help you to focus on the observing and measuring.
TECHNICAL SPECIFICATIONS
No |
Item |
LX1000 |
Remarks |
1 |
Magnification |
6X |
±5% |
2 |
Objective Diameter |
22mm |
±5% |
3 |
Resolution Center |
15” |
max |
4 |
Light Transmission(holistic): Peak photopia (550 nm) |
28% |
min |
5 |
Eye Relief |
16mm |
+/-1mm |
6 |
Field of View (degree) |
6.6° |
±5% |
7 |
Diopter Focus |
±4dpt |
|
8 |
Coating Type |
Multi Coating |
|
9 |
Range Reflective Building (Yd) |
1000YD |
White wall |
10 |
Min Range (Yd) |
5 |
|
11 |
Measuring Accuracy (± Yd) ≤ 100yds |
±1 |
|
12 |
Measuring Accuracy (± Yd) > 100yds & <500yds |
±2 |
|
13 |
Measuring Accuracy (± yd) @ > 500yds |
±5‰ |
|
14 |
Measuring resolution (± Yd) |
±0.1 |
|
15 |
Range acquisition time |
0.3~0.8s |
|
16 |
Inclinometer Range |
+85°~-85° |
|
17 |
Inclinometer Accuracy |
±2° (-59°≤ θ ≤59°) |
|
|
|
±4° (-85°≤ θ ≤85°) |
|
18 |
Display Type |
LCD |
|
19 |
Battery type |
CR2 Li-battery (Panasonic) |
|
20 |
Battery Life |
6000次 |
|
21 |
Waterproof |
IPX4 |
|
22 |
Weight (oz) |
137g(without battery) |
|
23 |
Dimensions ( mm ) |
107.3*72.2*35.2 mm |
Ful/function more ioy
- Range:5-1000yd
Simplicity of operation,quickly feedback Output include the line distance:horizontal distance:vertical distance:Golf mode;
speed measurement mode:angle and height difference:single and continuous measurement
- Lean:-85 degree to 85 degree
- Fast response
- High accuracy
- Compact: ergonomic design
- 6X monocular eyepiece with multicoating
- Easy usage with 16mm diameter of ocular
- Big field of view(6.6°)
- Diopter Focus ±5dpt
- IPX4
- Operation temperature(℃)-10_+50
- EN/IEC IEC60825 CLASS 1
Operating instructions
OPERATION
1.Install a CR2 battery in the battery chamber.short press POWER ON button, me display shows as follow:
- Then the default mode is Line mode after power on.Press POWER ON button again, start to measure.during the measurement the illbe flashing.
- Short press the Mode button to switch the measurement mode.
4.Press and hold the Mode Button for 3 seconds to adjust the unit.
5.Without any operation in 10 seconds, the rangefinder will shut down and save the last settings.
MODE NSTRUCTIONS
1.Line distance mode
Line distance is the distance from the target to the measurement point.
2.Horizontal distance mode
Horizonta distance is thehorizontal distance from the target to the measurement point.
3.Vertical distance mode
Vertica distance is the height difference from the target to the measurement point.
4.Golf mode--flagstick locking
Have you ever had trouble capturing the flagstick distance? This advanced mode can easily capture the flagstick and will not erroneously detect stronger background targets (such as trees). When using, align the target mark aiming with the flagstick you want to range. Then, long press the measurement mode (scanning) and slowly move the target mark on the flagstick or the object until a circle appears outside the flagstick and the rangefinder vibrates. If the rangefinder captures more than one object (such as flagstick and background trees),when displaying the distance of flagstick, a circle will appear outside the flagstick and the rangefinder will vibrate to tell you that the distance of flagstick (i.e. the closer object) is displayed on the display screen, as shown in the following figure.
5.Slope mode
The slope compensated range provides direction on how to play the shot(i.e.add distance if an incline,subtract distance if a decline).
Note:According to the different positions of golf course and green relative to users(uphill or downhild) golf slope compensation function can provide direct fairway trajectory to calculate the distance(Horizontal distance±Height).
6.Height difference mode
When in this MODE,the upper mark "1"flashes,means measuring thefirst point. If it gets the firstvalue target distance.mark "1"stops flashing Mark "2” flashes, means measuring the second point.after getting the second value target distance,it shows the height difference between the two points.Loop to "1" flash.
7.Hunting mode
When you go huntng.you can use the mode.
8.Speed mode
Speed mode can measure the speed of the target that moving. Keep pressing the Measurement button to scan and move the target mark along with the target being measured.
MODE INSTRUCTIONS
- Vibration alert
The rangefinder will vibrate when you get the distance data in any mode.
- Charging Instruction
If the rangefinder has low battery indicator,please use original USB cable to charge.
When the indicator light is red,it indicates that the battery is charging. When the light turns green, it shows that charging is complete.
GUARANTEE CARD
Declaration of Guarantee
- Guarantee time is 2 years
- During this period,any belongs' quality of the product under normal usage circumstance are under the guarantee of free maintenance.
- This card and the invoice are the evidence of guarantee
The following causes are not under guarantee
- User's mistakes of installment; operation and storage.
- Never let anyone other than the official representative of the product manufacturer check or repair the Laser Rangefinder otherwise the Laser Rangefinder will not be guaranteed by our company.
- No invoice or guarantee card;
- The SN number is conflict with the product part number.
- The damage is caused by external force.
- The use and stock temperature is out of the requirement of the Laser Rangefinder.
- Out of the guarantee period.